關鍵詞 |
漢高ABLESTIKJM7000導電膠 |
面向地區 |
LOCTITE ABLESTIK JM 7000 die attach adhesive has been
formulated for use in high throughput die attach applications. This
material has been used successfully on rigid substrates with die sizes
up to 700 mils.
LOCTITE ABLESTIK JM 7000 has been approved by DESC and
Rome Laboratory for military products.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PERFORMANCE OF CURED MATERIAL
Die Shear Strength:
2 X 2 mm Si die, kg-f,
cured 20 minutes @ 150oC
Substrate DSS
Ag/Cu LF ≥5
Tensile Strength :
cured 30 minutes @ 300oC, MPa
After Cure After 1000 TC'C"
>17 >17
Radius of Curvature:
Si die on Alumina, meters
cured 30 minutes @ 300oC
Chip Size: ROC
15 x 15 mm > 5
北京汐源科技有限公司
LED、電源、新能源行業膠黏劑供應商，技術人員提供整體用膠解決方案。
灌封膠、密封膠、導熱硅脂、導熱墊片、防靜電產品、UV膠等
有機硅灌封膠，導熱灌封膠，三防漆，密封粘接膠，漢高漢新，漢高樂泰，環氧樹脂灌封膠，導熱粘接膠，LED膠黏劑，電源灌封膠，電子膠水，北京導熱灌封膠，北京樂泰，北京三防漆，北京膠黏劑，厭氧膠，螺紋膠。lord灌封膠 道康寧膠 陶氏膠
青島本地漢高ABLESTIKJM7000導電膠熱銷信息
