樂泰ABLESTIK 2902 系為需要良好機械特性和電氣特性組合的電子粘接和密封應用設計。LOCTITE ABLESTIK 2902 通過美國太空 (NASA) 排氣標準
導電的
導熱的
無溶劑
高附著力
醫療器件導電膠，低溫固化導電膠，光纖導電膠，2902低應力導電膠。
體積電阻率, 24 hr. @ 25°C 0.001 Ohm cm
儲存溫度 27.0 °C
剪切強度, 鋁 700.0 psi
固化方式 室溫固化
固化時間, 推薦的 @ 25.0 °C 24.0 小時
基材 陶瓷
外觀形態 膏狀
技術類型 環氧樹脂
操作溫度 -60.0 - 110.0 °C
粘度 CP52, Speed 10 rpm 20000.0 mPa.s (cP)
組分?jǐn)?shù)量 雙組份

VALTRON?UltraLux? LF-1009-SB液體蠟粘合劑適用于直徑大于2英寸的半導體和光伏晶圓基板。UltraLux? LF-1009-SB液體蠟粘合劑具有高粘合強度、良好的耐溫性和低黏性，可在設備晶圓和晶圓基板上提供可靠的薄層粘合劑

The VALTRON? AD4803A/B temporary adhesive system is a two-component epoxy system consisting of the VALTRON? AD4803A
resin and VALTRON? AD4803B hardener. The cure time for this adhesive is approximately 2 hours at room temperature. This fast
curing adhesive system effectively adheres materials to dicing substrates and allows for quick and efficient removal. This series of
temporary adhesives can replace the temporary wax adhesives. The wax is not easy to be removed after use, but the VALTRON?
AD4803A/B system can be removed by hot water in minutes.